Core Support Filler Panels 67-72

Please note, for core support filler panels to fit properly you will need to trim the two bulges on the front of your core support. This is very easy to do. See pics. Passenger and drivers side are sold together as a set. They can be welded to our full length radiator cover, turning all of the panels into one seamless part as shown in the 2nd pic. Panels are designed to be installed on top of the hood latch. Do not drill holes in the panel to reinstall the Center hood latch bolt, or the two upper bolts. Refer to the second pic. Install button head bolts into the latch bracket, then tweak the panels with your hands so they fit snug against the core support. They will clear the button head bolts since the button heads don’t have corners for the panels to hit. Very few of our old trucks are adjusted exactly the same way, therefore some tweaking and trimming may be necessary. If you have any questions feel free to call me. 660-619-0158

Radiator cover sold separately!!!

Install video is on the website

Keep in mind that our C10’s are old farm trucks and do not have tight tolerances. Some trimming to the panels might be necessary. Call me if you need help.